How to treat bedbugs with Raptor? - briefly
Apply Raptor spray directly to infested surfaces, concentrating on seams, cracks, and mattress edges, then repeat the application after 7–10 days to target newly hatched nymphs. Ensure the treated area is well‑ventilated and avoid skin contact until the residue has dried.
How to treat bedbugs with Raptor? - in detail
The Raptor platform eliminates Cimex infestations through a combination of high‑temperature exposure and targeted vacuum extraction.
First, conduct a thorough visual inspection. Identify all harborages—mattresses, box springs, headboards, seams, cracks, and furniture joints. Mark each location with a non‑permanent indicator to ensure complete coverage.
Next, prepare the treatment area. Remove bedding, clothing, and clutter that could obstruct airflow. Seal vents and close windows to maintain temperature stability. Verify that the power supply can sustain the device’s 2 kW heating element for the planned duration.
The treatment proceeds in three phases:
- Pre‑heat phase (10‑15 min). The unit circulates ambient air to raise the room temperature to approximately 35 °C, preventing thermal shock to the insects and allowing heat to penetrate deep crevices.
- Thermal kill phase (30‑45 min). Temperature is increased to 50‑55 °C, sustained for at least 30 minutes. Sensors monitor real‑time heat distribution; any drop below the target triggers automatic compensation. At this range, all life stages of bedbugs are lethally desiccated.
- Extraction phase (15‑20 min). A high‑flow vacuum integrated into the system draws air through a HEPA‑rated filter, capturing dead insects, eggs, and shed skins. This reduces post‑treatment debris and prevents re‑infestation from residual bodies.
After the cycle, allow the environment to cool naturally. Conduct a second inspection to verify the absence of live specimens. If any live bugs are observed, repeat the thermal cycle on the affected zone.
Safety considerations include:
- Wearing heat‑resistant gloves and eye protection while handling the device.
- Installing carbon monoxide detectors if combustion‑based heating is used.
- Ensuring pets and children are removed from the treatment area for the entire duration.
Follow‑up measures consist of weekly visual checks for four weeks, laundering all removable fabrics at ≥60 °C, and sealing any newly discovered cracks with appropriate caulking. Consistent monitoring and maintenance of the treated space prevent resurgence and confirm long‑term eradication.