How to prepare an apartment for cold method treatment against bedbugs? - briefly
Clear all bedding, clothing, and personal items into sealed plastic bags, discard or wash infested fabrics, and vacuum every surface to eliminate debris. Ensure the space is unobstructed so the cryogenic equipment can circulate cold air uniformly throughout all rooms.
How to prepare an apartment for cold method treatment against bedbugs? - in detail
Preparing a residence for cryogenic bed‑bug eradication requires thorough de‑cluttering, protection of heat‑sensitive items, and coordination with the service provider.
First, remove all bedding, curtains, towels, and clothing from closets. Wash textiles in hot water (≥ 60 °C) and dry on high heat; otherwise store them in sealed plastic bags to prevent re‑infestation.
Second, eliminate clutter that could shield insects. Dispose of cardboard boxes, paper piles, and unnecessary decorations. Place remaining items on elevated surfaces or in sealed containers to allow unobstructed exposure to low temperatures.
Third, protect electronics, batteries, and other temperature‑sensitive devices. Pack them in insulated boxes, label clearly, and keep them away from the treatment zone.
Fourth, clear pathways to all rooms. Move furniture away from walls, lift mattresses, and roll out sofas to expose underlying frames. Ensure vents, baseboards, and cracks are accessible; seal large openings with plastic sheeting if necessary.
Fifth, coordinate timing with the treatment team. Confirm that the freezer‑temperature equipment will operate for the required duration (typically 48–72 hours). Arrange for continuous power supply and verify that the building’s electrical system can support the load.
Sixth, after the exposure period, allow the apartment to return to normal temperature gradually. Avoid immediate heating or cooling that could compromise the results. Re‑inspect all surfaces for residual insects, focusing on seams, folds, and hidden crevices.
Finally, re‑introduce cleaned textiles, reinstall furniture, and implement preventative measures: encase mattresses, seal cracks, and maintain regular inspections. Following these steps maximizes the effectiveness of cold‑based pest control and reduces the likelihood of recurrence.