How to use agran for bedbugs? - briefly
Apply Agran to all infested surfaces—mattress seams, bed frame crevices, and surrounding cracks—using the manufacturer’s recommended concentration, then repeat the treatment after 7‑10 days. Keep the area well‑ventilated until the product fully dries.
How to use agran for bedbugs? - in detail
Agran, a pyrethroid‑based insecticide, is effective against Cimex lectularius when applied correctly. Follow these steps to achieve maximum control.
-
Preparation
- Inspect all sleeping areas, furniture, and cracks where insects hide.
- Remove bedding, wash at ≥60 °C, and dry on high heat.
- Vacuum surfaces, seal the bag, and discard the vacuum bag promptly.
-
Safety measures
- Wear disposable gloves, long sleeves, and a mask rated for particulate protection.
- Ensure the room is well‑ventilated; open windows and use fans to circulate air.
- Keep children, pets, and food items out of the treatment zone.
-
Mixing the product
- Dilute agran according to the label: typically 1 ml of concentrate per 1 L of water for a spray solution.
- Stir the mixture thoroughly to prevent sedimentation.
-
Application technique
- Transfer the solution to a handheld or pump‑action sprayer.
- Apply a fine, even mist to all identified harborages: mattress seams, box springs, bed frames, baseboards, and wall voids.
- Target crevices, seams, and the undersides of furniture; avoid overspraying to reduce residue buildup.
-
Post‑treatment actions
- Allow the spray to dry for at least 30 minutes before re‑entering the area.
- Replace cleaned bedding only after the surface is dry.
- Repeat the entire process after 7–10 days to address newly emerged insects.
-
Monitoring and follow‑up
- Place adhesive traps near treatment sites to assess residual activity.
- Conduct visual inspections weekly for 4 weeks, focusing on previously infested zones.
- If activity persists, consider a second application with a reduced concentration (0.5 ml/L) to minimize resistance buildup.
Adhering to the label’s dosage, safety protocols, and repeat‑treatment schedule ensures comprehensive eradication of bed‑bug populations using agran.
