How to use a product against bedbugs? - briefly
Apply the labeled insecticide directly to infested zones—mattress seams, bed frames, cracks, and baseboards—according to the product’s dosage and exposure instructions, then vacuum and launder treated fabrics. Repeat the application after 7–10 days to eradicate newly emerged bugs.
How to use a product against bedbugs? - in detail
Begin by confirming the infestation. Inspect mattress seams, box‑spring, bed frame, headboard, and nearby furniture. Use a flashlight and a credit‑card‑sized piece of tape to capture specimens for identification.
Prepare the treatment area. Remove all bedding, wash linens in hot water (≥ 60 °C) and dry on high heat. Vacuum floors, carpets, and upholstery thoroughly; discard the vacuum bag or empty the canister into a sealed bag.
Select an appropriate product—spray, powder, or foam formulated for bed‑bug control. Follow the manufacturer’s label for dilution, if required. Wear protective gloves and a mask to avoid inhalation or skin contact.
Apply the solution in the following order:
- Mattress and box‑spring – spray the underside, seams, and tufts; allow the surface to remain wet for the time specified on the label.
- Bed frame and headboard – coat all joints, cracks, and crevices; pay special attention to hollow sections.
- Baseboards and wall voids – treat gaps where insects may hide; use a fine‑mist nozzle for narrow spaces.
- Carpet edges and floorboards – apply a thin layer along the perimeter; avoid over‑saturation that could damage flooring.
- Furniture and clutter – spray directly onto upholstered surfaces and inside drawers; for heavily infested items, consider encasement or professional heat treatment.
After application, keep the treated zone closed for the duration recommended by the product (typically 24–48 hours). Ensure adequate ventilation before re‑entering the space. Repeat the process after seven days to target newly hatched nymphs, then again after fourteen days to break the life cycle.
Maintain prevention measures: use mattress encasements, reduce clutter, and inspect travel items before bringing them indoors. Regular monitoring with sticky traps or interceptor devices will confirm the efficacy of the treatment and signal any resurgence.