How to prepare delcide for treating premises for fleas? - briefly
Mix the concentrate with water as directed on the label—usually 1 ml of delcide per liter of water—and spray the solution uniformly over all infested surfaces. Keep the area wet for at least 10 minutes, then allow it to dry and ventilate the premises.
How to prepare delcide for treating premises for fleas? - in detail
Prepare the insecticide solution according to the manufacturer’s specifications before applying it to indoor areas infested with fleas. Follow these steps precisely:
- Verify that the product is intended for indoor flea control and check the expiration date.
- Wear protective gear: gloves, goggles, long‑sleeved clothing, and a mask rated for chemical vapors.
- Calculate the required volume based on the square footage of the treated space. The label typically provides a dosage such as “X ml per 100 sq ft.”
- Measure the exact amount of concentrate with a calibrated syringe or graduated cylinder.
- Add the measured concentrate to a clean container of warm (not hot) water. Stir gently until the liquid is uniformly mixed; avoid vigorous shaking that could create foam or aerosolize the chemical.
- Transfer the solution to a pump‑action sprayer equipped with a fine‑mist nozzle. Prime the sprayer according to the manufacturer’s instructions to ensure even discharge.
Application guidelines:
- Empty the premises of pets, food, and non‑treated furnishings. Cover or remove sensitive items such as electronics and fabrics that could be damaged by the spray.
- Apply the mist in a slow, sweeping motion, maintaining a distance of 12–18 inches from surfaces. Ensure coverage of floors, baseboards, cracks, crevices, and upholstery where fleas and larvae hide.
- Overlap each pass slightly to avoid untreated gaps.
- Allow the treated area to remain closed for the duration specified on the label, typically 30–60 minutes, to permit full penetration and drying.
Post‑treatment actions:
- Ventilate the space by opening windows and using fans after the required contact time.
- Dispose of any leftover solution in accordance with local hazardous waste regulations; do not pour unused concentrate down the drain.
- Conduct a follow‑up inspection after 24 hours and repeat treatment if flea activity persists, adhering to the maximum frequency allowed by the product label.
Strict adherence to dosage, safety precautions, and thorough coverage maximizes efficacy while minimizing risk to occupants and the environment.