How to open flea drops? - briefly
Twist the bottle’s cap counter‑clockwise until it releases, then peel or cut away any protective seal covering the nozzle. Hold the dispenser upright, press the applicator gently to release the liquid onto the pet’s skin as directed.
How to open flea drops? - in detail
To access the medication inside a flea‑drop bottle, follow these precise actions.
- Locate the cap. Most products feature a sealed plastic or metal lid that twists clockwise to close.
- Grasp the cap firmly with the thumb and forefinger. Apply steady pressure while turning counter‑clockwise. If the cap resists, press the tab or lever often found on the side of the container; this releases the safety lock.
- Once the lid detaches, inspect the inner seal. Many flea‑drop tubes include a thin foil or plastic film covering the opening. Use a clean fingernail or a small, non‑sharp tool to lift the edge of the seal.
- Pull the seal away from the tube, ensuring the film does not tear. Discard the removed cover in a waste container.
- Hold the tube upright and dispense the required number of drops onto the pet’s skin or as directed by the label. Avoid touching the tip of the tube to prevent contamination.
- Replace the cap securely by turning it clockwise until resistance is felt. Verify that the safety lock clicks back into place, confirming a tight seal.
If the cap is stuck, immerse the bottle’s neck in warm water for 10–15 seconds. The heat expands the plastic slightly, easing removal. Do not use excessive force; breaking the cap may damage the container and expose the contents to air, reducing efficacy.
Store the product in a cool, dry place away from direct sunlight. Maintain the original packaging to protect the drops from moisture and temperature fluctuations. Regularly check the expiration date; using expired medication can compromise treatment results.