How to dilute Intavir for fleas? - briefly
Mix Intavir with water at a 1:9 ratio (one part concentrate to nine parts water) and apply the solution to the pet’s fur and surrounding environment. Let the mixture dry completely before the animal comes into contact with treated areas.
How to dilute Intavir for fleas? - in detail
Intavir, a liquid insecticide containing the active ingredient fipronil, must be mixed with water before use on pets or in the environment to control flea infestations. The recommended dilution depends on the product concentration, the target species, and the area of treatment.
Preparation steps
- Verify the label for the specific concentration (e.g., 0.05 % fipronil). Use the information to calculate the required volume of concentrate per litre of water.
- Measure the exact amount of Intavir using a calibrated syringe or graduated cylinder. For a typical 0.05 % solution, 5 ml of concentrate diluted in 1 L of water yields the label‑specified strength.
- Fill a clean container with the appropriate volume of lukewarm water. Add the measured concentrate slowly while stirring to ensure uniform distribution.
- Mix thoroughly for at least 30 seconds. Avoid vigorous shaking, which can create foam and reduce accuracy.
- Label the mixture with the dilution ratio, date of preparation, and intended use. Store the solution in a sealed, opaque container at room temperature, and discard any leftovers after 24 hours.
Application guidelines
- For topical treatment of dogs or cats, apply the diluted solution directly to the skin along the dorsal midline, avoiding the eyes, nose, and mouth. Use a calibrated applicator to deliver the exact dose per kilogram of body weight as indicated on the product label.
- For environmental treatment (e.g., carpet, bedding, indoor surfaces), spray the solution evenly using a low‑pressure pump sprayer. Ensure the area remains moist for at least 10 minutes before allowing pets to re‑enter.
- Observe the treated animal for adverse reactions for at least 30 minutes. If signs of irritation appear, rinse the area with plain water and contact a veterinarian.
Safety precautions
- Wear disposable gloves and eye protection while handling the concentrate and the diluted mixture.
- Keep the product out of reach of children and other non‑target animals.
- Do not mix Intavir with other chemicals, as incompatibility may reduce efficacy or produce hazardous reactions.
- Follow local regulations regarding disposal of unused solution and containers.
By adhering to these precise measurements and handling practices, the diluted formulation of Intavir will achieve the intended flea control while minimizing risk to the animal and the environment.