How should I apply butox for bed bugs? - briefly
Apply butox as a spray directly onto infested surfaces, thoroughly coating mattress seams, bed frames, cracks, and baseboards, then let it dry completely before use. Repeat the application after 7–10 days to eliminate newly emerged bugs.
How should I apply butox for bed bugs? - in detail
Apply butox as a liquid concentrate mixed with water according to the label’s dilution ratio, typically 1 ml per liter for indoor use. Use a calibrated sprayer to ensure even distribution. Target all potential harborages: mattress seams, box‑spring, bed frames, headboards, baseboards, cracks, and crevices near the sleeping area. Spray directly onto surfaces where bed bugs hide, allowing the solution to wet but not pool.
Before treatment, remove bedding and wash at ≥ 60 °C; vacuum floors and upholstery, then discard the vacuum bag. Wear disposable gloves, a mask, and eye protection to avoid skin or inhalation exposure. Work in a well‑ventilated room; close windows and doors after application until the spray dries.
Allow the product to remain on treated surfaces for the contact period specified on the label, usually 8–12 hours. After drying, re‑inspect the area for live insects. Repeat the application after 7–10 days to intercept newly emerged bugs that survived the first dose. For severe infestations, treat adjoining rooms and furniture using the same protocol.
Maintain a record of each application date, concentration used, and areas covered. Combine chemical treatment with non‑chemical measures—encasements, heat, and regular vacuuming—to increase overall efficacy. Dispose of any unused solution according to local hazardous‑waste regulations.