How can indoor plants be treated with Fitover for spider mites? - briefly
Apply Fitover as a foliar spray, thoroughly coating leaves and stems, and repeat the application every 7‑10 days until spider mites are eliminated. Dilute the product per label instructions and maintain proper watering to support plant health.
How can indoor plants be treated with Fitover for spider mites? - in detail
Fitover, a horticultural oil formulated for mite control, can be applied to houseplants to eliminate spider mite infestations. The product works by coating the insects, disrupting respiration and causing rapid mortality. Effective use requires preparation, correct dilution, thorough coverage, and post‑treatment monitoring.
Begin by inspecting the plant. Identify all affected foliage, paying special attention to the undersides of leaves where mites congregate. Remove heavily infested leaves if they are severely damaged, as this reduces the population and improves spray penetration.
Prepare the solution according to the label instructions, typically mixing 2 ml of Fitover concentrate with 1 liter of lukewarm water. Use a clean spray bottle or pump sprayer to ensure uniform distribution. Add a non‑ionic surfactant at the recommended rate (approximately 0.1 % v/v) to improve leaf wetting, especially on glossy surfaces.
Apply the mixture in the early morning or late afternoon when temperatures are between 15 °C and 25 °C and direct sunlight is minimal. Spray until runoff occurs, ensuring both the upper and lower leaf surfaces are thoroughly coated. Repeat the application every 7–10 days for three consecutive treatments, extending the interval to 14 days thereafter if mite activity declines.
After each spray, keep the plant in a well‑ventilated area for at least 2 hours to allow the oil to dry. Monitor for phytotoxic symptoms such as leaf discoloration or burn; if observed, reduce the concentration by 25 % on subsequent applications. Maintain proper humidity (40–60 %) and avoid over‑watering, as stressed plants are more susceptible to mite resurgence.
Finally, implement preventive measures: regularly clean leaves with a damp cloth, quarantine new plants before introduction, and maintain adequate air circulation. Consistent use of Fitover according to these guidelines provides reliable control of spider mites on indoor vegetation.