How to use Gektor for bed bugs? - briefly
Apply Gektor directly to infested cracks, crevices, mattress seams, and furniture edges, ensuring thorough coverage. Repeat the treatment after 7–10 days and follow the product’s safety instructions while monitoring for remaining activity.
How to use Gektor for bed bugs? - in detail
Gektor contains a synthetic pyrethroid formulated for direct contact with bed‑bug populations. The label specifies a concentration of 0.05 % active ingredient, effective against all life stages when applied correctly.
Before treatment, read the product label, wear disposable gloves and a mask, and ensure the area is well‑ventilated. Remove bedding, curtains, and clutter that could obstruct spray penetration. Wash and dry fabrics at high temperature if possible.
Apply the spray according to the following steps:
- Load the nozzle with the recommended amount of Gektor.
- Target seams, folds, and tufts of mattresses, box springs, and upholstered furniture.
- Treat cracks, crevices, baseboards, and behind headboards where insects hide.
- Use a fine mist to coat surfaces without oversaturating; excess liquid can damage fabrics.
- Allow the treated surfaces to dry for at least 30 minutes before re‑entering the room.
After the initial application, keep the treated space vacant for the drying period. Inspect the area after 24 hours; re‑treat any zones where live insects are observed. Follow a schedule of additional applications at 7‑day intervals for three cycles to interrupt the life cycle and prevent resurgence.
Maintain regular monitoring with sticky traps or visual inspections. If activity persists beyond the third cycle, repeat the full treatment protocol while confirming that all hiding places have been addressed. Proper disposal of used protective equipment and empty containers reduces the risk of accidental exposure.