How to treat plants with Fitoverm against ticks? - briefly
Apply Fitoverm as a foliar spray at the label‑specified rate, coating all leaves and stems, and repeat the treatment after 7–10 days to sustain control of tick populations. Ensure complete coverage and avoid applying before rain to promote optimal absorption.
How to treat plants with Fitoverm against ticks? - in detail
Fitoverm is a systemic acaricide formulated for foliar application on ornamental and agricultural plants to suppress tick populations. Effective use requires strict adherence to label rates, proper timing, and thorough coverage.
Begin by assessing the infestation level. Identify the plant species, growth stage, and surrounding environment. Record the target area in square meters to calculate the required volume of product.
Prepare the spray mixture according to the manufacturer’s concentration chart. Typically, a dilution of 0.5 ml of active ingredient per liter of water achieves a concentration of 30 g ai / ha. Use clean, potable water and a calibrated mixing container to ensure accuracy.
Apply the solution when ticks are most active, usually in the early morning or late afternoon when temperatures are between 15 °C and 25 °C and humidity exceeds 60 %. Use a fine‑mist sprayer to produce droplets of 20–30 µm, ensuring uniform coverage of foliage, stems, and the soil surface around the plant base. Avoid drift by maintaining a nozzle-to-canopy distance of 30–45 cm and spraying in calm wind conditions (<5 km/h).
After application, keep the treated area inaccessible to livestock and pets for at least 24 hours. Monitor the treated plants weekly for tick mortality and any phytotoxic symptoms. If tick numbers remain above economic thresholds after 14 days, repeat the treatment at the same rate, observing the maximum number of applications permitted per season (usually three).
Safety measures include wearing protective gloves, goggles, and a respirator rated for aerosol exposure. Store Fitoverm in its original container, tightly sealed, away from direct sunlight and temperatures above 30 °C. Dispose of unused mixture and rinse water according to local hazardous waste regulations.
Record all actions in a treatment log: date, product batch number, dosage, weather conditions, and observed efficacy. This documentation supports compliance with integrated pest management protocols and facilitates future decision‑making.