How to properly dilute Medilis Ciper for bedbugs?

How to properly dilute Medilis Ciper for bedbugs? - briefly

Mix one part Medilis Ciper concentrate with nine parts water to create a 10 % solution, then spray evenly onto all infested surfaces. Keep the coating wet for at least 30 minutes before vacuuming or laundering.

How to properly dilute Medilis Ciper for bedbugs? - in detail

To achieve an effective concentration of Medilis Ciper against Cimex lectularius, follow these precise steps.

1. Determine the required dilution ratio

   • Manufacturer’s label specifies 0.5 ml of concentrate per 1 liter of water for a 0.05 % solution.
   • Adjust based on infestation severity:
     • Light (≤5 insects): 0.25 ml / L (0.025 %).
     • Moderate (6‑20 insects): 0.5 ml / L (0.05 %).
     • Heavy (>20 insects): 1 ml / L (0.1 %).

2. Prepare measuring equipment

   • Use a calibrated syringe or graduated dropper for the concentrate.
   • Employ a clean, capacity‑marked container (preferably a plastic bucket with a lid) for the water.

3. Mixing procedure

   • Fill the container with the desired volume of lukewarm water (temperature 20‑25 °C).
   • Add the exact amount of Medilis Ciper concentrate according to the chosen ratio.
   • Stir gently for 30 seconds to ensure uniform distribution; avoid vigorous agitation that could create foam.

4. Application guidelines

   • Transfer the solution to a spray bottle equipped with a fine‑mist nozzle.
   • Apply to seams, cracks, mattress edges, and any crevices where bedbugs hide.
   • Ensure thorough wetting without oversaturation; excess liquid may damage fabrics.
   • Allow the treated surfaces to remain moist for at least 10 minutes before drying.

5. Safety precautions

   • Wear nitrile gloves and protective eyewear throughout the process.
   • Conduct the mixing in a well‑ventilated area; avoid inhaling aerosolized droplets.
   • Store any unused concentrate in its original sealed container, away from heat and direct sunlight.

6. Post‑treatment verification

   • After 24 hours, inspect treated zones for residual activity; re‑apply only if insects persist.
   • Record the date, dilution ratio, and volume used for future reference and efficacy tracking.

Adhering strictly to these guidelines yields a consistent, potent solution that maximizes the insecticidal action of Medilis Ciper while minimizing risk to occupants and furnishings.