How to prepare entomozan for fleas?

How to prepare entomozan for fleas? - briefly

Dissolve the appropriate dose of entomozan in warm water to reach a 0.5 g/L concentration, then spray the mixture onto the animal’s coat, covering skin and fur completely. Let the solution dry for 10–15 minutes before the pet resumes normal activity.

How to prepare entomozan for fleas? - in detail

Entomozan, a pyrethrin‑based concentrate, must be diluted correctly to achieve effective flea control while minimizing toxicity to pets and humans. Follow these precise steps.

1. Gather equipment: a clean, graduated container (minimum 1 L), a measuring cylinder or syringe, protective gloves, and a label for the finished solution. Ensure the workspace is well‑ventilated.

2. Determine the required concentration. For indoor flea treatment, the recommended strength is 0.5 ml of concentrate per liter of water. Adjust proportionally for larger volumes, maintaining the 0.5 ml : 1 L ratio.

3. Measure the concentrate. Using a calibrated syringe, draw the exact volume (e.g., 5 ml for a 10‑liter batch). Avoid over‑filling; excess concentrate does not increase efficacy and raises the risk of irritation.

4. Add water. Fill the graduated container with the appropriate amount of lukewarm water, then introduce the measured concentrate. Stir gently for 30 seconds to ensure uniform distribution. Do not shake vigorously, as this can create foam that interferes with application.

5. Verify dilution. If a clear, slightly cloudy mixture appears, the dilution is correct. Cloudiness beyond a light haze indicates insufficient mixing; repeat stirring.

6. Transfer to a spray bottle or fogger. Use a container compatible with the chemical, preferably one made of high‑density polyethylene. Label the container with concentration, preparation date, and safety warnings.

7. Apply to target areas. Spray carpets, bedding, and pet resting spots evenly, maintaining a distance of 15–20 cm from the surface. Avoid direct contact with pets’ eyes, nose, and mouth. For outdoor use, apply to shaded areas where fleas congregate, such as under decks or in foliage.

8. Post‑application safety. Keep pets and children away from treated zones for at least 30 minutes. Ventilate rooms by opening windows and using fans. Wash hands thoroughly after handling the solution.

9. Storage. Seal the original concentrate bottle tightly and store in a cool, dark place, below 25 °C. Keep the diluted solution in a clearly marked container, discard after 24 hours to prevent degradation.

10. Record keeping. Document batch size, date of preparation, and any observations regarding efficacy or adverse reactions. This log aids in optimizing future treatments and ensures compliance with regulatory guidelines.

By adhering to these procedures, users achieve a reliable, safe, and effective flea control preparation using entomozan.