How to prepare a salt and soda solution for fleas? - briefly
Combine 1 cup of table salt and 1 cup of baking soda in 1 liter of warm water, stirring until fully dissolved. Apply the solution to the pet’s coat or infested area, let it act for 10–15 minutes, then rinse thoroughly.
How to prepare a salt and soda solution for fleas? - in detail
A saline‑bicarbonate mixture can be used to eliminate fleas on pets and in the home environment. The solution works by disrupting the insects’ exoskeleton and interfering with their respiratory system.
Materials required
- Table salt (sodium chloride) – 1 cup (≈240 ml)
- Baking soda (sodium bicarbonate) – ½ cup (≈120 ml)
- Warm water – 2 liters (≈8 cups)
- Clean container with a lid
- Spray bottle (optional)
Preparation steps
- Measure the salt and baking soda accurately.
- Dissolve the salt in the warm water, stirring until fully dissolved.
- Add the baking soda to the solution, stirring continuously until no granules remain.
- Transfer the mixture to the container, seal, and shake gently to ensure uniform distribution.
Application guidelines
- For direct treatment of animals, fill a spray bottle with the solution and apply lightly to the coat, avoiding the eyes and mouth.
- For indoor use, spray the mixture onto carpets, bedding, and cracks where fleas hide.
- Allow the treated surfaces to remain moist for at least 30 minutes before vacuuming.
Safety precautions
- Test a small skin area on the animal before full application to check for irritation.
- Keep the solution out of reach of children and other pets.
- Store any unused mixture in a sealed container, labeled, and discard after 48 hours to prevent bacterial growth.
Regular re‑application every 3–5 days, combined with thorough cleaning, maximizes flea eradication.