How to drag bedbugs? - briefly
Gently lift the insects with a stiff card or soft brush and transfer them into a sealed, disposable container; then discard the sealed container promptly. Use gloves and avoid crushing the bugs to prevent scattering.
How to drag bedbugs? - in detail
To move bedbugs safely, follow a systematic approach that minimizes spread and protects the handler.
First, assemble the required equipment: heavy‑duty gloves, a disposable brush, a sealable plastic bag (minimum 2 mil thickness), a small vacuum equipped with a HEPA filter, a damp cloth, and a disinfectant approved for pest control. Place the bag on a stable surface within easy reach.
Second, isolate the infested area. Remove bedding, clothing, and any removable fabric items. Seal each item in a separate bag before handling. If the infestation is on a mattress or furniture, use a light‑weight sheet to cover the surface, preventing insects from escaping when disturbed.
Third, capture the insects. With gloved hands, gently coax the bugs onto the brush. Transfer them directly into the sealed bag, avoiding crushing. For larger numbers, operate the vacuum on low suction, directing the nozzle at the insects; immediately empty the vacuum canister into the bag, then seal.
Fourth, secure the containment. Expel any air from the bag, close the zipper or tie a knot, and place the sealed bag in a secondary container for added protection. Label the outer container with “infested material – do not open”.
Fifth, sanitize the workspace. Dampen the cloth with disinfectant, wipe all surfaces, and dispose of the cloth in a sealed waste bag. Run the vacuum with a HEPA filter for several minutes to capture stray particles.
Sixth, dispose of the sealed bag according to local regulations for hazardous waste or pest control. If disposal is not permitted, store the bag in a locked, temperature‑controlled area until professional exterminators can treat it.
Finally, inspect the surrounding area for residual activity. Repeat the capture and sanitation steps if any bedbugs are observed. Maintaining a sealed environment throughout the process prevents accidental relocation and ensures effective control.