How to dilute Regent for bed bugs? - briefly
Prepare a 10 % solution by mixing one part Regent concentrate with nine parts water (ratio «1:9»). Apply the diluted mixture to cracks, crevices, and bedding with a spray bottle, ensuring thorough coverage.
How to dilute Regent for bed bugs? - in detail
Regent concentrate must be mixed with water to achieve an effective concentration for bed‑bug control. Follow the recommended ratio of 0.5 mL of concentrate per liter of water to obtain a solution containing approximately 0.05 % active ingredient. Measure the liquid accurately with a calibrated syringe or graduated cylinder, then add it to a clean container of room‑temperature water. Stir the mixture gently until the concentrate is fully dispersed; excessive agitation can create foam that reduces uniformity.
Safety precautions are essential. Wear disposable gloves, goggles, and a mask rated for aerosol protection. Work in a well‑ventilated area, keeping children and pets away from the preparation zone. After mixing, label the container with the dilution ratio, date of preparation, and hazard warnings. Store the solution in a sealed, opaque container for no longer than 24 hours; prolonged storage may degrade the active compounds.
Application guidelines:
- Apply the solution to cracks, crevices, and seams where bed‑bugs hide, using a low‑pressure sprayer or a fine‑mist fogger.
- Ensure surfaces remain wet for at least 10 minutes to allow absorption.
- Treat all infested rooms simultaneously to prevent re‑infestation.
- After treatment, ventilate the area for at least 30 minutes before re‑occupying.
Disposal of excess solution must comply with local hazardous‑waste regulations. Rinse equipment with water, then discard rinse water in a sealed container for proper hazardous‑waste collection. Cleaning tools with soap and water removes residual pesticide residues.
By adhering to the specified dilution, safety measures, and application protocol, the Regent solution delivers reliable control of bed‑bug populations while minimizing risk to occupants and the environment.