How to dilute kerosene with oil for lice treatment?

How to dilute kerosene with oil for lice treatment? - briefly

Mix one volume of kerosene with three volumes of a neutral carrier oil (e.g., olive or coconut oil) and stir until a uniform solution forms. Apply the blend to the hair, let it act for 10–15 minutes, then rinse thoroughly, avoiding open flames and skin irritation.

How to dilute kerosene with oil for lice treatment? - in detail

Kerosene and vegetable oil can be combined to create a solution that suffocates head‑lice. The mixture must be prepared with precise ratios, clean tools, and strict safety precautions.

First, gather a clean glass or stainless‑steel container, a measuring cup, a stir rod, and a protective pair of gloves. Use a well‑ventilated area away from open flames, as kerosene is flammable.

Measure 1 part kerosene to 4 parts oil (for example, 25 ml kerosene mixed with 100 ml sunflower or olive oil). Add the oil to the container, then slowly pour the kerosene while stirring continuously. Stir until the liquids form a uniform, milky emulsion; do not shake vigorously, which can create bubbles that reduce contact with the hair shafts.

Transfer the emulsion into a small, airtight bottle with a narrow nozzle for precise application. Before use, test a few drops on a small skin area to check for irritation. If any redness or burning occurs, discard the mixture.

Application steps:

  • Part hair into sections of 2–3 cm.
  • Saturate each section with the solution, ensuring the scalp and hair shafts are thoroughly coated.
  • Cover the head with a plastic cap or cling film to trap the mixture for 30–45 minutes.
  • After the exposure period, rinse hair with warm water and a mild shampoo to remove residual oil.
  • Comb the hair with a fine‑toothed lice comb, discarding any captured nits.

Safety notes:

  • Do not apply the mixture to broken skin or irritated scalp.
  • Keep the preparation away from children and pets.
  • Store the remaining solution in a labeled, sealed container, out of reach of heat sources.
  • Dispose of used gloves and cleaning materials according to local hazardous‑waste guidelines.