How to dilute Fitoverm for ticks? - briefly
Mix Fitoverm with water at a ratio of 1 ml per 10 L of water and apply evenly to the targeted surface. Allow the solution to act for 10–15 minutes before rinsing if required.
How to dilute Fitoverm for ticks? - in detail
Fitoverm is a concentrated acaricide intended for use against tick infestations. Proper dilution ensures efficacy while minimizing toxicity to non‑target organisms.
The dilution process begins with selecting the correct concentration. Manufacturer specifications recommend a working solution of 0.5 ml of concentrate per litre of water for adult tick control on livestock. For environmental treatment of pastures, a lower rate of 0.25 ml per litre is advised. Adjustments may be necessary based on tick species, infestation severity, and ambient temperature; consult the product label for exact guidance.
Prepare a clean container capable of holding the total volume of solution. Add the measured amount of concentrate to the container first, then fill with water gradually while stirring to achieve uniform distribution. Use a mechanical agitator or a long stirring rod; avoid vigorous shaking that could generate foam and reduce mixing efficiency.
Safety precautions include wearing protective gloves, goggles, and a respirator rated for aerosol exposure. Perform the dilution in a well‑ventilated area away from open flames. After mixing, allow the solution to stand for 5–10 minutes to settle any suspended particles before application.
Application methods vary:
- Spraying directly onto the animal’s coat, ensuring thorough coverage of ears, neck, and hindquarters.
- Using a calibrated backpack sprayer for pasture treatment, moving at a consistent speed to maintain the recommended spray volume.
- Employing a low‑pressure misting system for large‑scale operations, monitoring droplet size to stay within the optimal range of 100–200 µm.
Post‑application steps involve rinsing equipment with clean water, disposing of rinse water according to local regulations, and recording the batch number, dilution ratio, and date of use for traceability.
Storage of the diluted solution is not recommended; prepare fresh batches for each treatment session. Unopened concentrate should be kept in a locked, temperature‑controlled facility, away from direct sunlight and moisture.
Regular monitoring of tick populations after treatment helps assess efficacy and determine the need for repeat applications. Follow the re‑treatment interval specified on the label, typically 14 days for adult ticks, to prevent resistance development.