How to dilute Creolin for fleas? - briefly
Mix Creolin and water at a 1:10 ratio (one part Creolin to nine parts water), shake the solution thoroughly, and apply it to the flea‑infested areas with a spray bottle. Use the mixture promptly and avoid prolonged skin contact.
How to dilute Creolin for fleas? - in detail
Creolin must be diluted before use on pets or in the environment to control fleas. Begin by wearing chemical‑resistant gloves and eye protection; the concentrate is caustic and can cause burns. Prepare a clean, non‑metallic container with at least one litre of lukewarm water. Add the recommended amount of Creolin concentrate—typically 50 ml per litre of water for a moderate potency solution. Stir gently until the liquid is uniform; vigorous shaking may create foam and reduce effectiveness.
After mixing, test the solution on a small, inconspicuous area of the pet’s coat or on a single spot of flooring. Observe for any irritation within five minutes. If no adverse reaction occurs, apply the diluted mixture using a spray bottle or a damp cloth, ensuring thorough coverage of the animal’s fur, especially around the neck, tail base, and underbelly. For environmental treatment, spray the solution onto carpets, bedding, and cracks where fleas hide, allowing it to remain damp for at least 30 minutes before vacuuming.
Key safety considerations:
- Do not exceed the stated concentration; higher levels increase toxicity without improving flea mortality.
- Keep the solution away from eyes, mucous membranes, and open wounds.
- Store any unused mixture in a clearly labeled, sealed container, out of reach of children and other animals; discard after 24 hours as potency declines.
- Rinse the pet with plain water after a maximum exposure time of 15 minutes to prevent skin irritation.
Repeat the application every 3–5 days until flea activity ceases, typically after two weeks of consistent use. Combine chemical treatment with regular vacuuming and washing of linens to break the flea life cycle.