How to dilute Cifox for fleas: usage instructions at home? - briefly
Dilute one part Cifox concentrate with nine parts lukewarm water (≈10 % solution) and apply the mixture evenly to the pet’s coat, avoiding eyes and open wounds. Let it stay wet for five minutes, then rinse or brush off and keep the animal in a ventilated area until it dries.
How to dilute Cifox for fleas: usage instructions at home? - in detail
Cifox is a liquid concentrate formulated to eliminate fleas on pets and in the home environment. Proper dilution is essential for safety and effectiveness. Follow the procedure below.
- Verify the product label for the recommended concentration; most formulations advise a 1 % solution for indoor use.
- Measure the concentrate with the supplied dropper or a calibrated syringe. For a 1 % mixture, add 10 ml of Cifox to 990 ml of water.
- Mix the solution in a clean, non‑reactive container. Stir gently until the liquid is uniform.
- Apply the diluted mixture with a spray bottle, targeting areas where fleas are likely to hide: bedding, carpets, upholstery, and pet resting spots.
- Allow the surface to remain damp for at least 10 minutes before vacuuming or wiping, to ensure contact time.
- Repeat the treatment weekly for three consecutive weeks, then assess the flea count and adjust frequency if needed.
Safety considerations:
- Wear disposable gloves and avoid direct skin contact with the concentrate.
- Keep the solution out of reach of children and non‑target animals.
- Do not use on food‑preparation surfaces or near open wounds on pets.
- Store the undiluted product in a cool, dark place, sealed tightly, away from heat sources.
Cleaning equipment after use prevents cross‑contamination. Rinse spray bottles with water and discard any leftover solution according to local hazardous‑waste guidelines. Following these steps yields a controlled, effective reduction of flea populations in a domestic setting.