How to dilute Cifox for fleas? - briefly
Combine one part Cifox concentrate with nine parts water to create a 10 % solution, then apply it as directed on the label for flea control. Use the mixture within the recommended time frame to ensure effectiveness.
How to dilute Cifox for fleas? - in detail
Cifox is a concentrated flea control solution that must be mixed with water before application. Follow these steps to achieve the correct dilution and ensure safe, effective use.
First, verify the product label for the recommended concentration. Most formulations advise a ratio of 1 ml of Cifox per 1 liter of water for standard indoor treatment. Adjust the volume proportionally if you need to treat larger or smaller areas.
Gather a clean container with a capacity that exceeds the total volume of the mixture. Use a measuring syringe or graduated cylinder to draw the exact amount of concentrate. Add the measured Cifox to the container, then fill with lukewarm water up to the required level. Stir gently to distribute the active ingredient evenly; excessive agitation can create foam and reduce efficacy.
Apply the solution promptly after mixing. Use a spray bottle, fogger, or pump sprayer depending on the surface to be treated. Ensure thorough coverage of carpets, upholstery, and floor seams, where flea larvae and eggs reside. For outdoor use, restrict application to shaded, non‑sunlit areas and avoid direct contact with plants.
Safety precautions:
- Wear gloves and eye protection while handling the concentrate.
- Keep the mixture away from food, water dishes, and children’s toys.
- Do not exceed the recommended concentration; higher levels can cause toxicity to pets and humans.
- Store any unused concentrate in its original sealed container, away from heat and sunlight.
After treatment, allow the surface to dry completely before allowing pets or occupants back into the area. Repeat the application according to the product’s re‑treatment interval, typically every 7–10 days, to break the flea life cycle.