How to correctly put a flea collar on cats? - briefly
Measure the collar so it fits snugly around the cat’s neck, leaving enough room to slip one or two fingers between the collar and skin, then fasten it according to the manufacturer’s instructions, ensuring the clasp is secure. Check that the collar sits low on the neck, away from the jaw, and monitor the cat for any signs of irritation.
How to correctly put a flea collar on cats? - in detail
Applying a flea collar to a cat requires preparation, correct positioning, and post‑application monitoring.
First, select a collar appropriate for the cat’s weight and age. Manufacturers usually label the safe weight range; using a collar that is too heavy can cause neck strain, while one that is too light may not deliver the intended dosage.
Second, familiarize yourself with the collar’s mechanism. Many models feature a detachable safety release and an adjustable buckle. Ensure the safety release is functional before use.
Third, follow these steps:
- Measure the cat’s neck – Place a flexible measuring tape around the base of the neck, allowing one finger’s width of space. Record the measurement.
- Adjust the collar – Slide the buckle until the collar length matches the measured value plus the safety margin. The collar should sit snugly but not restrict breathing or movement.
- Secure the safety release – Engage the release tab according to the manufacturer’s instructions. This feature allows the collar to detach if the cat becomes tangled.
- Fit the collar – Gently place the collar around the cat’s neck, positioning it just behind the ears. Ensure the collar does not touch the cat’s eyes or ears.
- Check tightness – Insert two fingers between the collar and the cat’s skin. If the collar slides excessively, tighten it by a small increment; if the cat shows signs of discomfort, loosen it slightly.
- Observe the cat – Monitor for at least 15 minutes after fitting. Look for signs of irritation, excessive scratching, or attempts to remove the collar. If any adverse reaction occurs, remove the collar immediately and consult a veterinarian.
Finally, replace the collar according to the product’s recommended interval, typically every 30‑90 days, depending on the active ingredients. Store unused collars in a cool, dry place, away from direct sunlight, to preserve efficacy. Regularly inspect the collar for wear, broken components, or loss of fragrance, and discard it if any damage is evident.