How to correctly dilute delcid to 2 ml for treating an apartment for fleas? - briefly
Measure the required amount of concentrate (e.g., 0.2 ml if the product’s label specifies a 1 % solution) and add sterile water until the total volume reaches exactly 2 ml, mixing thoroughly before application. Use a calibrated syringe or dropper to ensure precision and avoid over‑dilution.
How to correctly dilute delcid to 2 ml for treating an apartment for fleas? - in detail
To prepare a 2 ml solution of delcid for flea treatment in a residence, follow these precise steps.
Gather the required items: delcid concentrate, a calibrated syringe or graduated pipette, a clean mixing container with a lid, disposable gloves, protective eyewear, and a well‑ventilated area. Verify that the concentrate’s label lists the recommended dilution ratio for indoor flea control.
Calculate the volume of concentrate needed. If the label advises 0.5 ml of concentrate per 100 ml of water, the proportion for 2 ml total volume is:
[ \frac{0.5\ \text{ml}}{100\ \text{ml}} \times 2\ \text{ml} = 0.01\ \text{ml} ]
Thus, measure 0.01 ml (10 µl) of delcid. Use a calibrated micropipette or a syringe capable of delivering such a small volume; accuracy at this scale is critical.
Add the measured concentrate to the mixing container. Fill the container with clean water until the total volume reaches exactly 2 ml. Cap the container and shake gently for 5–10 seconds to ensure uniform distribution.
Inspect the mixture for clarity; any undissolved particles indicate incomplete mixing and require additional agitation. Do not exceed the 2 ml total volume, as excess may alter the intended concentration and increase toxicity risk.
Apply the solution according to the product’s instructions: spray or mist treated areas, focusing on cracks, baseboards, and upholstery where fleas hide. Maintain a short exposure time (typically 10–15 minutes) before allowing occupants to re‑enter the space, as specified by the label.
After use, dispose of any leftover solution in accordance with local hazardous waste regulations. Clean all equipment with water and store gloves and eyewear in a dry place. Record the dilution details and application date for future reference.