How to correctly dilute Delcid 2 ml for treating an apartment for ticks? - briefly
Mix the 2 ml container of Delcid with 18 ml of water to achieve a 1:10 dilution, then apply the solution uniformly to all walls, floors, baseboards and crevices, keeping the surface wet for a minimum of 30 minutes. Observe the safety instructions on the label, including use of protective gloves and adequate ventilation during and after treatment.
How to correctly dilute Delcid 2 ml for treating an apartment for ticks? - in detail
To prepare an effective solution for indoor tick control using a 2 ml dose of Delcid, follow these precise steps:
- Measure exactly 2 ml of the concentrate with a calibrated syringe or dropper.
- Add the measured concentrate to a clean container holding 1 liter of warm (not hot) water.
- Stir the mixture for at least 30 seconds until the liquid appears uniformly cloudy, indicating complete dissolution.
Safety measures:
- Wear disposable gloves and protective eyewear throughout the process.
- Perform mixing in a well‑ventilated area to avoid inhalation of vapors.
- Label the container with concentration, date, and intended use; store out of reach of children and pets.
Application guidelines:
- Transfer the prepared solution to a spray bottle equipped with a fine‑mist nozzle.
- Apply evenly to all floor surfaces, baseboards, cracks, crevices, and upholstered furniture where ticks may hide.
- Ensure the spray remains wet for a minimum of 10 minutes before wiping or vacuuming.
- Repeat the treatment after 7 days to target any newly hatched ticks.
Cleanup:
- Dispose of any leftover solution according to local hazardous waste regulations.
- Rinse the spray equipment with clean water and allow it to dry before storage.
Adhering to these instructions guarantees the correct dilution ratio, maximizes efficacy against ticks, and minimizes health risks to occupants.