How should the 5 ml Fitoverm product for ticks be diluted? - briefly
Dilute the 5 ml of Fitoverm concentrate in 500 ml of clean water, achieving a 1 : 100 ratio. Apply the resulting solution according to the product’s usage instructions.
How should the 5 ml Fitoverm product for ticks be diluted? - in detail
The 5 ml Fitoverm tick formulation must be mixed with a carrier solvent before use. The recommended ratio is 1 ml of concentrate to 99 ml of water, producing a 1 % (v/v) solution. For the 5 ml container, combine the entire content with 495 ml of clean, room‑temperature water.
Procedure
- Measure 5 ml of the product into a clean, graduated container.
- Add 495 ml of dechlorinated water.
- Stir gently for 30 seconds to ensure uniform distribution; avoid vigorous shaking that could introduce bubbles.
- Allow the mixture to stand for 2 minutes; any sediment will settle, and the solution will reach a stable concentration.
Safety and handling
- Wear disposable gloves and eye protection while preparing the solution.
- Do not use hot water; temperatures above 30 °C may degrade the active ingredient.
- Label the diluted batch with preparation date, concentration, and intended use.
Storage
- Keep the prepared solution in a sealed, opaque container.
- Store at 4–8 °C and use within 48 hours; prolonged storage reduces efficacy.
Application guidelines
- Apply the solution uniformly to the animal’s coat, ensuring thorough coverage of the skin surface.
- Use a calibrated spray device delivering 1 ml per 10 cm² of body area.
- Re‑treat after 14 days or according to the parasite‑control schedule.
Quality control
- Verify dilution accuracy by sampling 10 ml of the solution and measuring active‑ingredient concentration with a calibrated spectrophotometer; the result should fall within 95–105 % of the target 1 % level.
Following these steps yields a correctly diluted Fitoverm product suitable for effective tick control.