How should Rubit be mixed for fleas? - briefly
Mix Rubit with water at a 1 : 10 proportion, spray evenly onto the flea‑infested zone, and re‑apply after 24 hours. Use the same dilution for each treatment session.
How should Rubit be mixed for fleas? - in detail
Rubit must be prepared as a homogeneous liquid concentrate before application to pets or premises infested with fleas. The mixture should contain the active ingredient at the concentration recommended by the manufacturer, typically 0.5 % w/v for topical use.
Preparation steps
- Measure the required amount of Rubit powder with a calibrated scale.
- Add the measured powder to a clean container containing the appropriate volume of distilled water.
- Stir with a magnetic stirrer or a glass rod for at least two minutes until no visible particles remain.
- Verify the final concentration with a calibrated refractometer; the reading must correspond to the target 0.5 % w/v.
- Transfer the solution to an opaque, tightly sealed bottle to protect it from light degradation.
Application guidelines
- Apply the prepared solution directly to the animal’s dorsal neck region, avoiding the eyes and mucous membranes.
- For environmental treatment, spray the solution evenly on carpets, bedding, and crevices where fleas hide, maintaining a wet film for at least 30 minutes.
- Use a calibrated spray nozzle delivering 1 mL per 10 cm² of surface area.
- Allow the treated area to dry before allowing pets back into the environment.
Safety precautions
- Wear nitrile gloves and protective eyewear during mixing.
- Keep the mixture out of reach of children and non‑target animals.
- Store the sealed container at 4–25 °C, away from direct sunlight; discard any solution that changes color or develops an odor.
Stability and re‑mixing
- The prepared solution remains effective for up to 14 days when stored as directed.
- Before each use, shake the container briefly to re‑suspend any settled particles.
- If the solution shows signs of precipitation, repeat the mixing procedure with fresh distilled water.
Following these precise steps ensures consistent efficacy against flea infestations while minimizing the risk of adverse reactions.