How should flea dust be used in a house? - briefly
Apply flea dust to carpets, pet bedding, floor seams and other hiding places, leave it undisturbed for 24–48 hours, then vacuum thoroughly. Repeat the application after two weeks to interrupt the flea life cycle.
How should flea dust be used in a house? - in detail
Flea dust must be applied to all areas where insects can hide, reproduce, or travel. Begin by removing loose debris: vacuum carpets, rugs, upholstered furniture, and floor seams; discard the vacuum bag or clean the canister immediately to prevent re‑infestation. After cleaning, allow surfaces to dry completely.
Spread a thin, even layer of the powder on the following locations:
- The underside of furniture legs and the base of sofas.
- Gaps between floorboards, baseboards, and wall‑floor junctions.
- Inside pet bedding, cages, and carrier compartments (avoid direct contact with animal skin).
- Cracks in walls, behind radiators, and under appliances.
- The tops and backs of mattresses and box springs.
Use a hand duster or a fine‑mesh sieve to achieve uniform coverage. Do not saturate the surface; excessive amounts can cause dust accumulation and reduce effectiveness.
Leave the dust in place for the period specified by the manufacturer, typically 48–72 hours. During this interval, restrict movement through treated zones; keep pets and children away from direct contact. After the exposure time, repeat vacuuming to remove residual particles and any dead insects.
For ongoing control, repeat the entire procedure every four to six weeks, or after noticing a resurgence of flea activity. Maintain regular cleaning routines and monitor pet health to complement chemical treatment.