How does a raptor for bedbugs work? - briefly
A raptor for bedbugs employs a targeted lure—typically heat, carbon dioxide, or a specific wavelength of light—to draw insects toward a capture surface, where they become trapped and are killed by a rapid‑acting toxin or electrical shock. The system cycles continuously, maintaining high efficacy while minimizing exposure to occupants.
How does a raptor for bedbugs work? - in detail
The device marketed as a raptor for bedbugs combines suction, trapping, and disposal in a single handheld unit.
A small electric motor drives a high‑speed fan that creates a pressure differential of 0.5–1 kPa. This differential pulls air and any contacted insects through a narrow intake nozzle, typically 10 mm in diameter, which concentrates the flow and maximizes capture efficiency.
Inside the nozzle, a stainless‑steel mesh or fine nylon screen prevents the insects from escaping while allowing air to pass. The captured bugs fall into a sealed collection chamber made of clear polycarbonate; the chamber features a one‑way valve that permits entry but blocks reverse flow, ensuring that once an insect is inside it cannot re‑enter the environment.
The unit incorporates a rechargeable lithium‑ion battery supplying 12 V to the motor, providing 15–20 minutes of continuous operation per charge. A built‑in LED illuminates the target area, enhancing visibility of hidden insects on mattresses, baseboards, and furniture.
Operational steps are:
- Turn on the device; the fan begins drawing air through the nozzle.
- Position the nozzle against a suspected infestation site; the suction lifts bedbugs from fabric or cracks.
- Maintain contact for 2–3 seconds per spot to ensure complete removal.
- After treatment, depress the release button to seal the collection chamber and prevent accidental spillage.
- Empty the chamber into a sealed waste bag; the interior lining is treated with a residual insecticide that kills any remaining specimens.
Maintenance includes:
- Emptying the chamber after each use to avoid overflow.
- Cleaning the intake nozzle and mesh with a soft brush and mild soap solution to remove residues.
- Recharging the battery weekly or after every 10 hours of cumulative use.
The combination of focused suction, a one‑way capture system, and integrated illumination enables rapid, chemical‑free reduction of bedbug populations in residential settings.