How do I use Palach for bed bugs? - briefly
Apply Palach directly to known infestation zones—mattress seams, bed frame joints, and surrounding cracks—using the recommended dosage, then allow it to dry before re‑covering bedding. Repeat the treatment after 7–10 days to interrupt the bugs’ development cycle.
How do I use Palach for bed bugs? - in detail
Palach is a silica‑based dust formulated to eliminate bed‑bug infestations through desiccation. Apply the product according to the following protocol.
Prepare the area. Remove bedding, curtains, and clothing; launder items in hot water and dry on high heat. Vacuum mattresses, box springs, and surrounding furniture, then discard the vacuum bag or clean the canister to prevent re‑contamination.
Wear disposable gloves and a dust mask to avoid inhalation. Transfer a small amount of Palach into a clean, dry container. Using a hand‑held duster or a low‑pressure applicator, dust a fine, even layer onto cracks, crevices, headboards, bed frames, baseboards, and any hidden pathways where insects travel. Do not saturate surfaces; a light coating is sufficient for the silica particles to absorb moisture from the insects’ exoskeletons.
Allow the dust to settle for at least 24 hours. During this period, keep the treated space unoccupied to minimize exposure. After the waiting period, vacuum the treated surfaces gently to remove excess dust while leaving a residual layer in inaccessible gaps.
Inspect the environment weekly. If live insects are observed, repeat the dusting process on the same locations. Continue monitoring for four to six weeks, as the life cycle of bed bugs may require multiple exposures to achieve complete eradication.
Dispose of used gloves, masks, and vacuum contents in sealed bags. Store any remaining Palach in its original container, tightly sealed, and out of reach of children and pets.
Following this systematic approach maximizes the efficacy of silica‑based dust and reduces the risk of re‑infestation.