Entomozan: how should the product be applied, how to treat an apartment for fleas, and how to dilute it? - briefly
Apply Entomozan directly to the affected surfaces, spraying a thin, even coat on floors, carpets, and upholstery, then keep pets and people out of the treated area for at least 4 hours; dilute the concentrate according to the label, typically 1 ml per liter of water for indoor use. For a full apartment treatment, repeat the spraying in all rooms, focus on cracks and baseboards where fleas hide, and maintain the dilution ratio throughout the process.
Entomozan: how should the product be applied, how to treat an apartment for fleas, and how to dilute it? - in detail
Entomozan is a liquid concentrate intended for flea control in residential environments. Apply it according to the manufacturer’s dosage chart, which specifies the amount of product per square meter of floor space. Use a clean spray bottle or a pump sprayer, fill it with the measured volume, and distribute the solution evenly over carpets, rugs, and hard‑floor surfaces. Ensure the spray reaches the underside of carpet fibers and the edges of baseboards where fleas often hide.
Dilution guidelines
- For routine treatment: mix 10 ml of concentrate with 1 L of water.
- For severe infestations: mix 20 ml of concentrate with 1 L of water.
- For spot‑treatment of localized areas: use 5 ml of concentrate per 500 ml of water.
Stir the mixture gently before each use to maintain uniform concentration. Do not exceed the recommended ratios, as higher concentrations can damage fabrics and pose health risks.
Apartment‑wide flea eradication
- Remove all bedding, pet blankets, and washable textiles; launder them at the highest temperature the fabric tolerates.
- Vacuum carpets, upholstery, and floor cracks thoroughly; discard the vacuum bag or clean the canister immediately after use.
- Apply the diluted solution to all carpeted areas, allowing the liquid to penetrate the fibers. Repeat the application after 48 hours to interrupt the flea life cycle.
- Treat hard surfaces (tiles, laminate, wood) with the same dilution, focusing on crevices, under furniture, and near pet sleeping spots.
- After the final spray, keep windows open for ventilation for at least 30 minutes. Restrict pet and human access to treated zones until the surface is dry.
Safety precautions
- Wear disposable gloves and a mask while mixing and spraying.
- Keep children, pets, and food items out of the treated area until drying is complete.
- Store the concentrate in a locked cabinet, away from direct sunlight and temperatures above 30 °C.
- In case of skin contact, rinse with plenty of water; if irritation persists, seek medical advice.
Following these steps ensures effective flea elimination while minimizing risk to occupants and furnishings.