What should I buy to get rid of cockroaches and bedbugs?

What should I buy to get rid of cockroaches and bedbugs? - briefly

Use cockroach baits or gel insecticides with sticky traps, and treat bedbugs with silica‑based powder or a heat‑treatment kit plus mattress encasements. Apply each product according to label directions and repeat after several days to ensure complete eradication.

What should I buy to get rid of cockroaches and bedbugs? - in detail

To eliminate cockroaches, acquire the following items and use them as indicated:

  • Gel bait stations containing hydramethylnon, fipronil, or baits with boric acid. Place stations in dark corners, under appliances, and near plumbing. Replace every 30 days or when bait is depleted.
  • Aerosol spray formulated with pyrethroids or a combination of pyrethrin and piperonyl butoxide. Apply to cracks, crevices, and behind cabinets. Re‑treat after two weeks if activity persists.
  • Insecticidal dust such as diatomaceous earth or silica gel. Lightly dust inside wall voids, behind baseboards, and in appliance voids. Avoid excessive dust on surfaces that will be cleaned frequently.
  • Sticky traps with pheromone lures. Position along travel routes to monitor population density and verify treatment effectiveness.

For bed‑bug eradication, purchase these products and follow the prescribed procedures:

  • Mattress and box‑spring encasements rated for bed‑bugs. Seal seams with a high‑strength zipper. Keep encasements on for at least one year to prevent re‑infestation.
  • Interceptor cups for each leg of the bed. Install under the legs, collect insects attempting to climb, and replace weekly.
  • Professional‑grade steam cleaner capable of reaching 150 °C (300 °F). Treat seams, folds, and crevices of furniture, carpets, and wall hangings. Move the nozzle slowly to ensure lethal temperature exposure for at least 30 seconds per spot.
  • Residual spray containing bifenthrin, chlorfenapyr, or a neonicotinoid. Apply to baseboards, behind headboards, and in cracks where insects hide. Allow the surface to dry before re‑occupying the area.
  • Silica‑based dust or diatomaceous earth. Sprinkle in voids, under furniture, and within wall gaps. Leave undisturbed for several days, then vacuum.

Additional measures improve results:

  • Vacuum all flooring and upholstery with a HEPA‑rated filter. Immediately empty the canister into a sealed bag and discard.
  • Launder bedding, curtains, and removable fabric items at 60 °C (140 °F) or higher. Dry on high heat for at least 30 minutes.
  • Seal entry points with caulk, expanding foam, or steel wool. Focus on gaps around pipes, electrical outlets, and window frames.
  • If infestations persist after multiple treatment cycles, engage a licensed pest‑control service for heat‑treatment or fumigation.

All chemicals must be stored out of reach of children and pets. Follow label instructions for dosage, ventilation, and personal protective equipment. Proper sequencing—bait placement, dusting, spraying, and then monitoring—maximizes eradication efficiency while minimizing re‑infestation risk.