Medilis Zipper, how to dilute for fleas? - briefly
Dilute Medilis Zipper with water at a ratio of 1 ml product to 100 ml water, apply the mixture to the pet’s coat and surrounding areas, then allow it to dry. Use the solution once weekly for effective flea control.
Medilis Zipper, how to dilute for fleas? - in detail
Medilis Zipper is a concentrated flea treatment intended for dilution before application. The product must be mixed with water according to precise ratios to achieve an effective concentration while preventing toxicity to pets and the environment.
The recommended dilution for indoor spray is 1 ml of Medilis Zipper per 4 liters of lukewarm water. This yields a solution containing approximately 0.025 % active ingredient, sufficient to eliminate adult fleas and disrupt the life cycle. For outdoor use, increase the volume to 6 liters while maintaining the same 1 ml dose, allowing deeper penetration into soil and vegetation.
Preparation steps:
- Measure the exact volume of Medilis Zipper with a calibrated syringe or dropper.
- Add the measured liquid to a clean container.
- Fill the container with the required amount of water, stirring gently to ensure uniform distribution.
- Allow the mixture to sit for 5 minutes before use, permitting the active compounds to fully solubilize.
- Transfer the solution to a pump or trigger sprayer; avoid prolonged storage in the sprayer to reduce degradation.
Safety precautions:
- Wear disposable gloves during handling.
- Keep the solution away from eyes and mucous membranes.
- Do not apply directly to the animal’s skin; spray only on bedding, carpets, and surrounding areas.
- Store the undiluted concentrate in a cool, dark place, sealed tightly, away from children and pets.
Application guidelines:
- Treat all areas where fleas are likely to reside, focusing on pet sleeping zones, cracks in flooring, and under furniture.
- Reapply the diluted mixture every 7 days during peak flea season; extend intervals to 14 days in cooler months when flea activity declines.
- After each treatment, ventilate the space for at least 30 minutes before allowing pets back into the environment.
Monitoring effectiveness:
- Inspect pets and treated zones weekly for signs of live fleas or eggs.
- If infestation persists after three applications, verify that the dilution ratio has been strictly followed and consider increasing the frequency to every 5 days for a short period, then revert to the standard schedule.
By adhering to the specified ratio, preparation protocol, and safety measures, Medilis Zipper provides reliable flea control with minimal risk to non‑target organisms.