How to use Butox against fleas? - briefly
«Butox» should be applied directly to the skin at the nape of the animal’s neck, allowing it to distribute across the body; repeat the treatment as recommended on the label, usually every four weeks. Ensure the skin is clean and dry before application and keep the product away from the eyes.
How to use Butox against fleas? - in detail
Butox, a synthetic pyrethroid, provides rapid knock‑down of adult fleas when applied correctly. Preparation begins with reading the product label to confirm the appropriate concentration for the target species and environment. Measure the recommended amount of concentrate with a calibrated dispenser; typical rates range from 0.1 ml per kilogram of animal weight for topical use or 5 ml per 10 m² for indoor spray applications.
Application steps:
- Clean the area or animal surface to remove debris and excess oils that could impede absorption.
- For topical treatment, part the fur and apply the measured dose directly to the skin at the base of the neck, avoiding eyes and mucous membranes.
- For environmental spraying, fill a pump‑atomizer with the diluted solution, maintain a distance of 20–30 cm from surfaces, and spray evenly, covering cracks, crevices, and bedding.
- Allow the product to dry before permitting the animal or occupants to re‑enter the treated zone; drying time is usually 10–15 minutes for surfaces and 5 minutes for skin.
Safety precautions include wearing gloves, a mask, and eye protection during preparation and application. Store the concentrate in a locked, temperature‑controlled area away from children and food. Do not combine Butox with other insecticides unless the label explicitly permits it, as antagonistic interactions may reduce efficacy.
Timing considerations:
- Apply the first dose immediately after detecting an infestation; repeat at the interval specified on the label, often every 30 days for ongoing protection.
- For severe infestations, a second application after 7 days can break the life cycle, targeting emerging larvae before they mature.
Post‑treatment monitoring involves inspecting the animal or premises daily for live fleas, noting any reduction in activity. If flea counts remain high after two consecutive applications, reassess dosage accuracy, coverage completeness, and potential resistance; consult a veterinary professional for alternative control strategies.