How to get a tick using a pen? - briefly
To create a tick, hold the pen at an angle, draw a brief downward stroke, then lift and pull the tip upward in a short diagonal motion to form a check‑mark. This produces a clear, recognizable tick with a single pen movement.
How to get a tick using a pen? - in detail
A tick mark can be produced with a pen by applying controlled pressure and precise movement. The process consists of three main steps.
First, select a pen with a fine tip, such as a ball‑point or gel pen, to ensure a sharp line. Position the pen tip perpendicular to the paper surface, keeping the nib at a slight angle (approximately 45°) to facilitate a clean stroke.
Second, execute a short, swift motion:
- Place the pen tip at the intended start point of the tick.
- Pull the pen downward and slightly leftward (or rightward, depending on the desired orientation) for about 2–3 mm.
- Immediately reverse direction, moving upward and rightward (or leftward) to complete the second leg of the tick, forming a “✔” shape.
Third, adjust the pressure to avoid excess ink buildup, which can blur the mark. A light, consistent force yields a crisp, legible tick suitable for forms, checklists, or annotations.