How to dilute the Apollo product for ticks? - briefly
Mix the Apollo concentrate with water at a 1:10 ratio (one part «Apollo» to nine parts water) for effective tick control. Apply the diluted solution evenly to vegetation where ticks are present, allowing it to dry before any re‑application.
How to dilute the Apollo product for ticks? - in detail
The Apollo concentrate for tick control must be mixed to a specific active‑ingredient concentration before field use. The label recommends a target of 0.5 g of active ingredient per 1 L of water for standard applications.
To obtain the required amount of concentrate, use the formula:
required ml = (target dose (g/L) ÷ concentration of product (g/ml)) × desired volume (L)
For example, if the product contains 10 g ml⁻¹ of active ingredient and 1 L of spray solution is needed:
required ml = (0.5 ÷ 10) × 1 = 0.05 ml
Because such a small volume is difficult to measure accurately, scale the preparation to a larger batch, e.g., 10 L:
required ml = (0.5 ÷ 10) × 10 = 0.5 ml
Steps for dilution:
- Fill a clean mixing container with the desired volume of cold, clean water.
- Add the calculated amount of concentrate slowly while stirring constantly.
- Continue agitation for at least 30 seconds to ensure homogeneity.
- Perform a visual inspection for uniform distribution; no visible separation should remain.
Safety measures:
- Wear chemical‑resistant gloves, goggles, and protective clothing.
- Prepare the mixture in a well‑ventilated area.
- Avoid skin contact; in case of exposure, rinse immediately with plenty of water.
- Keep the concentrate sealed when not in use; store in a cool, dry place away from direct sunlight.
Application guidelines:
- Apply the solution using a calibrated sprayer to achieve a coverage of 200 L ha⁻¹.
- Treat vegetation during early morning or late afternoon to minimize volatilisation.
- Re‑apply at 7‑day intervals if tick pressure remains high, respecting the maximum annual number of applications indicated on the label.
After use, discard any remaining diluted solution according to local hazardous‑waste regulations; do not store the mixture for later use, as potency may degrade. Re‑mix fresh solution for each application to maintain efficacy.