How to dilute delcid in ampoules for flea treatment in an apartment? - briefly
«Mix one ampoule of delcid with 250 ml of warm water, stirring until fully dissolved». Apply the resulting solution evenly to all floor surfaces, let it dry completely before re‑entering the apartment.
How to dilute delcid in ampoules for flea treatment in an apartment? - in detail
Delcid, supplied as a concentrated solution in ampoules, must be mixed with water before application to achieve an effective concentration for indoor flea control. The process requires accurate measurement, thorough mixing, and safe handling.
First, gather the necessary equipment: a clean measuring cup with millilitre markings, a container capable of holding the total volume, a stirring rod or disposable spoon, and protective gloves. Ensure the work area is well‑ventilated and free from pets.
The recommended dilution ratio for residential use is 1 ml of delcid concentrate per 1 liter of water. To prepare a typical 5‑liter batch, follow these steps:
- Measure 5 ml of the concentrate using the calibrated cup.
- Pour the measured concentrate into the container.
- Add 5 liters of lukewarm water to the container.
- Stir the mixture for at least 30 seconds until the solution appears uniform.
If a smaller volume is needed, maintain the same proportion: 1 ml of concentrate for every 1 liter of water. For example, 250 ml of water requires 0.25 ml of concentrate; use a syringe or dropper for precise dosing.
After preparation, apply the solution with a spray bottle or fogger according to the product instructions, covering carpets, upholstery, and floor seams. Allow the treated surfaces to remain wet for the contact time specified on the label, typically 30 minutes, before permitting re‑entry.
Dispose of any unused concentrate and cleaning materials in accordance with local hazardous waste regulations. Store remaining ampoules in a cool, dark place, sealed tightly to preserve potency.