How should you properly dilute the Palač solution for fighting bedbugs? - briefly
Mix one part Palač concentrate with nine parts water to create a 10 % solution and apply it uniformly with a spray bottle. Keep the treated surfaces wet for at least 15 minutes before wiping or vacuuming.
How should you properly dilute the Palač solution for fighting bedbugs? - in detail
To achieve the correct concentration of the Palač formulation for bed‑bug control, follow these precise steps.
- Identify the label‑specified ratio. The product manual typically recommends a 1 % v/v solution, meaning one part concentrate to ninety‑nine parts water.
- Measure the concentrate with a calibrated graduated cylinder or a syringe marked for milliliters. For example, to prepare a 1‑liter batch, dispense 10 ml of the active solution.
- Add the measured concentrate to a clean, chemically resistant container.
- Fill the container with lukewarm tap water up to the 1‑liter mark.
- Secure the lid and invert the container several times to ensure uniform mixing. Do not shake vigorously, as excessive agitation can cause foaming and reduce efficacy.
- Verify the final volume with a measuring device; adjust with water if necessary.
Additional considerations:
- Perform dilution in a well‑ventilated area to avoid inhalation of vapors.
- Wear chemical‑resistant gloves and eye protection throughout the process.
- Label the prepared solution with concentration, preparation date, and expiration time (typically 24 hours for most Palač products).
- Store the mixture in a sealed, opaque container away from direct sunlight and heat sources.
- Dispose of any excess concentrate according to local hazardous‑waste regulations; never pour undiluted product down the drain.
When applying the solution, use a calibrated sprayer set to deliver 100 ml per square meter, ensuring thorough coverage of cracks, crevices, and mattress seams where bed‑bugs hide. Re‑treat after seven days if monitoring indicates continued activity.