How should the Medilis Ziper product be diluted for tick treatment? - briefly
Mix one part Medilis Ziper with nine parts water (1 : 10 dilution) and apply the solution at the label‑specified rate, typically 0.5 ml per liter of water. Ensure thorough coverage of the animal’s hide and repeat treatment according to the product’s schedule.
How should the Medilis Ziper product be diluted for tick treatment? - in detail
The Medilis Ziper concentrate must be mixed with water before use on cattle or other livestock to control ticks. Follow these steps precisely:
- Measure 5 ml of the concentrate for every 1 liter of clean, lukewarm water. This ratio yields a solution of 0.5 % active ingredient, which is the standard concentration for effective tick eradication.
- Add the measured concentrate to the water container, close the lid, and shake or stir vigorously for at least 30 seconds to ensure uniform distribution.
- Verify that no residue remains on the container walls; a quick visual inspection confirms complete mixing.
- Apply the solution using a calibrated spray pump or low‑pressure misting system, covering the entire body surface of the animal. Ensure thorough wetting of the hide, especially around the ears, under the tail, and between the legs where ticks commonly attach.
- Maintain the spray pressure between 0.2 and 0.4 bar to avoid excessive runoff while achieving adequate penetration.
- Repeat the treatment after 7 days to interrupt the tick life cycle, as recommended by the product label.
Additional precautions:
- Prepare the mixture immediately before application; the solution loses potency after 24 hours.
- Store the concentrate in a cool, dry place, protected from direct sunlight. Do not expose the prepared solution to temperatures above 30 °C.
- Wear protective gloves and eyewear while handling the concentrate to avoid skin irritation.
- Record the batch number, dilution ratio, and application date for traceability and compliance with veterinary regulations.