How should an apartment be treated for fleas with Entomazan?

How should an apartment be treated for fleas with Entomazan? - briefly

Apply Entomazan spray to all carpeted surfaces, cracks, and upholstered furniture, then vacuum thoroughly and repeat the treatment after 7–10 days to interrupt the flea life cycle. Keep humidity low and perform regular cleaning to prevent re‑infestation.

How should an apartment be treated for fleas with Entomazan? - in detail

Treat a residence for flea infestation with Entomazan by following a systematic protocol.

Begin with preparation. Remove all bedding, pet blankets, and washable fabrics; launder them at the highest temperature the material tolerates. Vacuum every carpet, rug, and upholstered surface thoroughly, discarding the vacuum bag or emptying the canister into a sealed bag. Seal any cracks in baseboards, under doors, and around pipe penetrations to limit re‑infestation pathways.

Proceed to safety measures. Ensure occupants and pets are absent from the premises during application and for the duration specified on the product label, typically 12–24 hours. Wear protective gloves, goggles, and a mask rated for aerosol exposure. Open windows after the waiting period to ventilate the space.

Apply Entomazan according to label instructions. Use a calibrated pump sprayer or a fogger calibrated for the square footage of the apartment. Distribute the solution evenly, focusing on:

  • Carpet pile and backing
  • Upholstered furniture seams
  • Pet sleeping areas
  • Cracks and crevices in flooring and baseboards
  • Under furniture legs and behind appliances

Maintain a wet film on each treated surface for the contact time indicated (usually 10–15 minutes). Do not over‑apply; excess liquid can cause runoff and damage.

After the contact period, re‑vacuum all treated areas to remove dead insects and residual product. Dispose of vacuum contents in a sealed container. Clean any surfaces that may have been oversprayed, following the manufacturer’s cleaning recommendations.

Implement a monitoring phase. Place flea traps or sticky pads in high‑risk zones for 7–10 days. Inspect pet fur and bedding daily; repeat a second Entomazan application if trap counts remain above the threshold specified on the label.

Conclude with preventive actions. Maintain regular vacuuming, wash pet bedding weekly, and treat pets with a veterinarian‑approved flea control product to prevent recurrence.