How should a flea collar be properly placed on a cat using celandine, step by step? - briefly
Apply a thin celandine paste to the inner surface of the collar, place the collar around the cat’s neck just behind the ears, fasten it snugly without restricting breathing, and check regularly for signs of irritation.
How should a flea collar be properly placed on a cat using celandine, step by step? - in detail
Before beginning, verify that the cat is healthy, coat is free of mats, and the flea collar is intended for use with a celandine additive.
-
Prepare the collar – Open the packaging, remove the collar, and inspect the celandine-infused segment for damage or discoloration.
-
Measure the cat’s neck – Use a flexible measuring tape to determine the circumference. Add 1 cm (approximately 0.4 in) to allow a snug but movable fit.
-
Adjust the length – Slide the fastening mechanism to the measured length. Most collars feature a sliding buckle or a series of pre‑punched holes; select the position that matches the measurement.
-
Apply celandine – If the collar includes a separate celandine pad, place it inside the collar’s pocket according to the manufacturer’s instructions. Ensure the pad contacts the cat’s skin when the collar is worn.
-
Position the collar – Gently lift the cat’s head, place the collar around the neck, and slide it forward until the clasp sits just behind the ears, where the cat cannot reach it with its paws.
-
Secure the fastening – Fasten the buckle or snap, then pull the free end to tighten. Confirm that two fingers can slide between the collar and the cat’s skin; this prevents choking while maintaining effectiveness.
-
Observe the cat – Allow the animal to move freely for several minutes. Watch for signs of irritation, excessive scratching, or attempts to remove the collar.
-
Record the date – Note the installation date on a calendar or the collar itself; most flea collars remain effective for 30–90 days, depending on the celandine concentration.
-
Routine checks – Inspect the collar weekly for wear, loss of celandine scent, or damage. Replace the collar according to the product’s lifespan.
Following these steps ensures the flea collar fits correctly, maximizes the repellent properties of celandine, and maintains the cat’s safety.