How can a solution of baking soda and salt for fleas be prepared? - briefly
Combine equal parts of baking soda and salt (e.g., 1 cup each) with enough warm water to create a thin solution, stir until fully dissolved, then apply the mixture to the pet’s bedding or affected areas and let it dry.
How can a solution of baking soda and salt for fleas be prepared? - in detail
A flea‑control mixture can be created by combining sodium bicarbonate and sodium chloride in a liquid base.
Materials
- Baking soda, ½ cup (≈120 g)
- Table salt, ½ cup (≈150 g)
- Warm water, 2 L (approximately 8 cups)
- Clean container with a lid
- Stirring utensil (spoon or whisk)
- Protective gloves (optional)
Procedure
- Measure the dry ingredients accurately and place them in the container.
- Add warm water gradually while stirring continuously to ensure complete dissolution.
- Continue mixing for 1–2 minutes until no granules remain visible.
- Seal the container and shake gently for an additional 30 seconds to homogenize the solution.
Safety considerations
- Verify that the pet has no known sensitivity to sodium bicarbonate or salt.
- Avoid direct contact with eyes; wear goggles if desired.
- Store the mixture in a cool, dark place; use within 7 days to prevent microbial growth.
Application
- Apply the liquid to carpets, pet bedding, and areas where fleas are suspected, using a spray bottle or cloth.
- Allow the surface to remain damp for 10–15 minutes before vacuuming or washing.
- Repeat treatment every 3–4 days until fleas are no longer observed.
The described method yields a straightforward, cost‑effective solution for managing flea infestations without the need for commercial chemicals.